MACHINERY & SPECIFICATIONS

Machine Line Specifications

“The Best In The West” is a title that we’ve earned, and we aim to keep.

BRANER LINE #1
Precision Coil Slitting

Braner Slitter Line – 70,000# x 1,000 FPM
Automotive ClassDouble Loop Coated Coil
with Inline Surface Inspection Stand:

Gauge range is from 0.013” to 0.250” with a
quick change Turret Head Design.  This is
Braner’s most technologically current line,
improving upon those used by the nation’s
finest automotive industry steel service
centers.  It is specially designed for surface-
critical coated materials.   With the Hi Pass
line, large 88” entry O.D., and 72” width
capability, this Braner line is one of the
most universal and modern lines currently
available on the West Coast.

Material Data:

  • Material: Low Carbon Steels
  • (Cold Roll, Electro-Galvanized, Galvanneal, Hot Dipped Galvanized, Aluminized, Painted, Stainless, and some Non-Ferrous Products)
  • Shear Strength: 50,000 psi.
  • Strip Thickness: 0.250” (6.35 mm)
  • Strip Thickness: 0.013” (0.33 mm)

Coil Specifications:

  • Entry/Exit Wt.: 70,000# (31.75 MT)
  • Width: 72” (1829 mm)
  • Min/Max. Entry I.D.: 20” (508mm) / 33” (838mm)
  • Min/Max. Exit I.D.: 20” (508mm) / 33” (838mm)
  • Max O.D.: 88” (2235mm)

Slitter Capacities:

  • Slitter Arbor Diameter: Two (2) heads @ 9.000”
  • Overwind / Underwind Capable For Two-Sided Surface Inspection
  • Inspection Stand w/Strobe Lights (Inline) & Coil Mapping
  • Operating Speed: 1,000 FPM
  • Shear Strength: 50,000 PSI
  • Drives: 250/150 HP-DC
  • Max Loop Slit: 20+ Cuts
  • Modes: Single/Double/Tight Loop
  • Roll Tension For Wet and Dry Material
Background

BRANER LINE #2
Precision 
Leveling
and Multi-Blanking

Braner Multi-Blanking Line – 60,000# x 72” x 250
FPM Automotive Class-1 Precision Sassette
Leveler /Servo Feed Multi-Blanking Line:

Gauge range is from 0.015” to 0.1350” with a
quick change Turret Head Design.  This is a
high-speed close-tolerance line capable of
converting bare and coated carbon flat rolled
products into panel-flat sheets and precision
blanks at a rate of up to 100 cycles per minute.
It utilizes a 9 Flight x 5 Hi Cassette Leveler and
an inline Slitting Turret Head.  Its Hi-Cyclical rate
Electronic AC Servo Feed system, combined
with its programmable air stacker, allow us to
produce the flattest most scratch-free precision
tolerance blanks in the region.

Material Data:

  • Material: Low Carbon Steels (Coated & Bare Cold Rolled Steel)
  • Max. Shear Strength: 50,000 psi
  • Max. Strip Thickness: 0.135”(3.43 mm)
  • Min. Strip Thickness: 0.015” (0.38 mm)

Coil Specifications:

  • Max. Entry/Exit Wt.: 60,000# (27.22 MT)
  • Max. Width: 72” (1829 mm)
  • Min./Max. Entry I.D.: 20” (508mm) / 33” (838mm)
  • Max. O.D.: 80” (2032mm)

Sheet/Blank Data:

  • Max. Sheet Length: 144”
  • Min. Sheet Length: 10”
  • Max. Sheet Width: 72”
  • Min. Multi-Blank Width: 5”
  • Max. Multi-Blanks: 6 (Six Finished Blanks)

Packaging Data:

  • Max. Pack/Skid Weight: 10 Ton (20,000#)
  • Maximum Pack Height: 24” Including Skid
  • Packaging Spec:  Custom Packaging available upon request
Background

LINE #3
Heavy Gauge
Slitting Line

Head Wrightson 10,000# x 24″

Strip Thickness: .075″ to .250″
Max OD: 62″
Max Coil Width: 24-1/4″
Line Direction: (Left to Right)
Max Coil Capacity: 20,000lb
Line Speed: 300 FPM

PAY OFF REEL

  • Max Coil Width: 25-1/2″
  • 40 HP Motor
  • 20,000 lb. Max

SLITTING ARBOR

  • 150 HP DC Motor
  • Arbor Size: 7.5″
  • Cutting Capacity: (10 cuts of 1/4″, 13 cuts of 3/16″, 19 cuts of 11 ga.)

DUAL SCRAP WINDERS

RECOILER

  • Max Coil Width: 24-1/4″
  • 60 HP DC Motor
  • MAX ID/OD: 20″/62″

DC DRIVE

  • Solid State
  • Model No. 300/6
  • Series 1681

LOOPCO EXIT COIL CAR

  • 20,000 lb.cap.
Background

“PTP HAS BEEN OUR MOST RELIABLE PARTNER FOR OVER A DECADE. WE VALUE OUR PARTNERSHIP AND WE’RE LUCKY TO HAVE THEM PROCESSING FOR US.”

DAVID D. – TOYOTA AUTO BODY

CLEAN DIESEL TRUCKS
SOLAR POWERED FACILITY

PTP IS HERE FOR THE FUTURE
AND HERE FOR YOU, TODAY