With our state-of-the-art Slitting and Multi-Blanking lines, we have the ability to efficiently produce coils and sheets of quality unmatched in the region.  Our complete service center, machinery, and trained operators are dedicated to producing the best flat roll products for both distribution and toll.  Whether you choose PTP to supply your company with coil or sheet products, or utilize our state of the art machinery for your toll processing, we have made the commitment and significant investments necessary to ensure 100% customer satisfaction.

Gauge range is from 0.013” to 0.250” with a quick change Turret Head Design.  This is Braner’s most technologically current line, improving upon those used by the nation’s finest automotive industry steel service centers.  It is specially designed for surface-critical coated materials.   With the Hi Pass line, large 88” entry O.D., and 72” width capability, this Braner line is one of the most universal and modern lines currently available on the West Coast.

Slitter Specifications and Capabilities:

1. Material:  Low Carbon Steels
(Cold Roll, Electro-Galvanized, Galvanneal, Hot Dipped Galvanized, Aluminized, Painted, Stainless, and some Non-Ferrous Products)
2. Max. Shear Strength:  50,000 psi.
3. Max. Strip Thickness:  0.250” (6.35 mm)
4. Min. Strip Thickness:  0.013” (0.33 mm)

1. Max. Entry/Exit Wt.:  70,000# (31.75 MT)
2. Max. Width: 72” (1829 mm)
3. Min./Max. Entry I.D.: 20” (508mm) / 33” (838mm)
4. Min./Max. Exit I.D.:  20” (508mm) / 33” (838mm)
5. Max. O.D.:  88” (2235mm)

1. Slitter Arbor Diameter: Two (2) heads @ 9.000”
2. Overwind / Underwind Capable For Two-Sided Surface Inspection
3. Inspection Stand w/Strobe Lights (Inline) & Coil Mapping
4. Operating Speed: 1,000 FPM
5. Shear Strength:  50,000 PSI
6. Drives:  250/150 HP-DC
7. Max. Loop Slit:  20+ Cuts
8. Modes: Single/Double/Tight Loop
9. Roll Tension For Wet and Dry Material

Gauge range is from 0.015” to 0.1350” with a quick change Turret Head Design.  This is a high-speed close-tolerance line capable of converting bare and coated carbon flat rolled products into panel-flat sheets and precision blanks at a rate of up to 100 cycles per minute.  It utilizes a 9 Flight x 5 Hi Cassette Leveler and an inline Slitting Turret Head.  Its Hi-Cyclical rate Electronic AC Servo Feed system, combined with its programmable air stacker, allow us to produce the flattest most scratch-free precision tolerance blanks in the region.

Multi Blanking Line Specifications and Capabilities:

1. Material:  Low Carbon Steels (Coated & Bare Cold Rolled Steel)
2. Max. Shear Strength:  50,000 psi
3. Max. Strip Thickness: 0.135”(3.43 mm)    
4. Min. Strip Thickness: 0.015” (0.38 mm)

1. Max. Entry/Exit Wt.:  60,000# (27.22 MT)
2. Max. Width: 72” (1829 mm)
3. Min./Max. Entry I.D.:  20” (508mm) / 33” (838mm)
4. Max. O.D.:  80” (2032mm)

1. Max. Sheet Length:  144”
2. Min. Sheet Length:  10”
3. Max. Sheet Width:  72”
4. Min. Multi-Blank Width:  5”
5. Max. Multi-Blanks:  6 (Six Finished Blanks)

1. Max. Pack/Skid Weight:  10 Ton (20,000#)
2. Maximum Pack Height:  24” Including Skid
3. Packaging Spec:  Custom Packaging available upon request